110V 16A Adaptor

This adaptor is used to connect 110V tools and equipment fitted with 16A 110V plugs to a standard PAT tester. Battery powered PAT testers can safely carry out earth continuity, insulation resistance and substitute leakage tests on 110V equipment. When using a 230V powered PAT tester, some caution is needed to avoid inadvertently carrying out a leakage or load test at 230V, which will likely damage the 110V equipment under test. For regularly testing 110V equipment, we recommend the Kewtech Ezypat Plus, or Kewtech Smartpat, which can be connected to a 110V supply to safely carry out a leakage and load test at 110V.

For testing 110V extension leads, an additional extension lead adaptor will also be required, or both adaptors are available together as a 110V adaptor kit.

Yellow industrial plugs and sockets are typically used for 110V power tools and other electrical equipment on construction sites in the UK. Sizes up to 125A are available, but 16A and 32A are the most often encountered whilst PAT testing. We also have a 32A 110V appliance adaptor available.

These adaptors are constructed with BS EN 60309 industrial connectors made by PCE, a leading manufacturer of high quality connectors based in Austria.